A strong, dry surface is formed from 1-2577 room temperature curing coating, which can be used for better operation and abrasion resistance.This coating requires the moisture in the air to solidify, which will accelerate the solidification rate when heated.Products with solvents and low levels of volatile organic compounds.
Product features
1, contact with the base material is better, the heat conduction rate is higher, suitable for all kinds of heat sinks, can reduce the production cost of the customer.
2, the thickness of the bond layer is small, so the thermal resistance rate is low, only 0.1 & ordm.C * cm2 / W.
3, the stability is excellent, not under the pressure influence in the process, provides a wide range of operation for the customer.
Application scenarios
Dow corning 1-2577 is mainly used for the protection of rigid and flexible circuit boards.
This kind of fast curing temperature cure coatings, one-component, self-adhesive coating, flexible transparent elastic plastic coating is formed after curing, is an ideal material to use printed circuit board, especially for toughness and wear resistance of circuit board.
The performance parameters
Method of useUsage: this article can be applied to apply brush, spray, coating, etc., and the coating is not to flow.
Before applying the glue: before applying the coating, you must remove the water and grease from the surface of the object.
Glue: a coating thickness is usually between 0.1 and 0.2 mm.
The pecking order: after the first coating, it can be applied to the second time.
Finally the film thickness should be 0.3 ~ 0.5 mm.
After the operation is completed, the adhesive should be tightened and sealed immediately.Professional adhesive technology solution please click for consultation
DOW CORING 1-2577 anti-paint purchase links:
