Dow corning 184 silicone is a type of elastomer with optical transparency.It is widely used in electronic equipment requiring low stress because of its characteristics such as non-corrosive, easy stripping, transparent and low stress protection.
Product features
Low stress protection: solidified into elastomer, in the bad environment such as mechanical vibration and cold and heat cycle, the protective component is not destroyed.
No corrosion: the addition of a reaction system, no byproducts produced by the reaction process, the volume is unchanged, and the environment is greener.
Transparency: transparency.It can be applied to require transparency, or at lower optical requirements.
Easy stripping: smooth surface, low surface, easy to mold.
Applicable scenario
Suitable for low-stress electronic equipment.
For example: sensors, PDMS modules, petri dishes, laboratory molds.
The performance parameters
Method of use
Pretreatment: the surface needs to be cleaned or degreased for the best filling effect, and the dc-1200 - OS is recommended.
Glue: use manual or automatic equipment to mix A and B in proportion (weight ratio).
In the case of the gas mixing, it is necessary to take 5-10 minutes of degassing in the vacuum of the 10-20mm mercury column, and the removal time should be prolonged.
Place the sealing parts to the top and place them in the top, and then pour in the sealant and self-flush.
Solidification: the temperature of the product solidifies, heating can accelerate the solidification.
Professional provide adhesive solution, technical support please consult:
